View HVP500_4653292.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

H HiTRON
UNIVERSAL INPUT HARMONIC CORRECTION AC-DC N+1 REDUNDANCY AND ACTIVE CURRENT SHARING ENCLOSURE PLUG-IN BOX TRIPLE OUTPUT 500 WATTS INTERNAL SWITCHING POWER SUPPLIES HVP500 SERIES
FEATURES:
ACCOMMODATE UNIVERSAL AC SOURCES DUAL CONVERTER ARCHITECTURE MEET IEC 61000-3-2 HARMONIC CORRECTION HOT-SWAPPABLE/OR-ING DIODES FOR N+1 REDUNDANCY MEET UNIVERSAL SAFETY STANDARDS EMI MEET EN 55022 CLASS A CE MARKING COMPLIANCE
SPECIFICATION
INPUT SPECIFICATION
Input Voltage: Typ. 90-264 Vac with PFC. Input Connector: IEC320-3P with On/Off Switch. Input Frequency: 47-63Hz. Inrush Current: Typ. 24.0A@230Vac (Active). Input Current: Typ. 7.0A@115Vac/ 3.5A@230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet EN 55022 Class A. Hold-up Time: Typ. 28mS @ 115Vac & 230Vac. Power OK Signal: Available at VO1, VO2 & VO3. Power Factor Correction: Meet Harmonic Correction IEC 61000-3-2. PF typ. 0.97-0.98. Over Temperature Protection: By thermostat. Power-On LED Indicator: Installed. Earth Leakage: Less than 0.78mA@230Vac.
OUTPUT SPECIFICATION
Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Connector: Molex Mini-Fit 5569-24. Output Wattage: 500 watts max. Line Regulation: Typ. 0.1%. Load Regulation: Main VO1 typ. 2.0%. Main VO2 typ. 2.0%. Aux. VO3 typ. 2.5% (Magnetic Amp). Noise & Ripple: Typ. 1-2.0% peak to peak. OVP: Built-in at all outputs (Latch). Over Current Protection: Installed in all outputs. Redundancy: All three O/P available for N+1 redundancy operation. Current Sharing: 3rd-wire current sharing for VO1,2. OR-ing Diode: Installed in VO1,2,3. Adjustability: Available at VO1,2,3. Remote Sense: Available at VO1 & VO2. Overload Protection (OLP): Fully protected against output overload or short circuit. Consult the factory for OLP setting. Operating Temperature: 0 to +50C. Storage Temperature: -20 to +85C. Temperature Coefficient: Typ. 0.04% /C. Cooling: Cooling fan installed inside. MTBF: About 60,000 hours at full load and 25C condition by MIL-HDBK-217F spec. Construction: Enclosure box with cooling fan.
GENERAL SPECIFICATION
Efficiency: Typ. 65-70%. Switching Frequency: Fixed frequency at 60K Hz. Circuit Topology: PWM fixed-frequency forward circuit. Transient Response: Output voltage returns in typ. 0.3mS following a 25% load change. Safety Standard: UL 60950-1/EN 60950-1 Class I. Hot Swappable: Available. Power Density: 2.72 Watts/ Cubic Inch.
Note: Due to requests in market and advances in technology, specifications subject to change without notification.
In application
-65-
OUTPUT VOLTAGE / CURRENT RATINGS CHART
TRIPLE OUTPUT
MAIN VO1 @# MODEL NO. Typ. HVP500-T033EI HVP500-T033EK HVP500-T033EM HVP500-T050DI HVP500-T050DK HVP500-T050DM 100.0A 100.0A 100.0A 75.0A 75.0A 75.0A Volt. +3.3V +3.3V +3.3V +5.0V +5.0V +5.0V Typ. 25.0A 25.0A 25.0A 25.0A 25.0A 25.0A Volt. +5.0V +5.0V +5.0V +3.3V +3.3V +3.3V Typ. 4.0A 3.2A 2.0A 4.0A 3.2A 2.0A Volt. +12.0V +15.0V +24.0V +12.0V +15.0V +24.0V MAIN +VO2 @# AUX. +VO3 @
Symbol: " " OVP built-in. "@" Adjustable. "" Installed with OR-ing diode. "" Installed with magnetic amplifier. "" Active load sharing. "#" Remote sense.
MECHANICAL DIMENSIONS: MM [INCHES]
WEIGHT: 3,500.0g. (7.72 lb.)
INPUT & OUTPUT CONNECTORS PIN ASSIGNMENTS
AC INPUT ASSIGNMENT AC-L AC-N AC-G CONNECTOR & PIN # L N G VO1 TRIPLE OUTPUT VO2 VO3 P2-20,21 DC COM P1-5~11,16~22 P2-5,6,7,8,17,18,19 P1-1~4,12~15,23,24 P2-3,4,15,16 P2-1,2,13,14 P.OK +VO1 +VO2 VO1+# VO1-# P2-10 P2-11 P2-24 P2-9 ASSORTED SIGNAL VO2+ VO2- +VO1 +VO2 +VO3 # # MSR MSR MSR P2-12 P2-22 P2-23 P3-1 P3-2 P3-3
Mating connector: Molex 5557-24 or 42358-24. Remark: means output measurement Point.
-66-

▲Up To Search▲

Price & Availability of HVP500

	To Download HVP500 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .